A report on red mud
magnetic separation test (Origin sample comes from
Yueyang Dalishen Electromagnetic Machinery Co.,
Ltd.
No.1
Tel. /Fax: +86-730-7600700
Test
Report
Date of test: Nov. 10th, 2012
Tested by: Zhou Qizhen, Yang Dishan, Yang
Wenyong, Wan Weihong
The sample is red mud (bauxite residues after
Bayer process for alumina). Take 500 gram sample. After drying, the 500 gram
sample is 403 gram. Moisture is 19.4% and Total Fe% is 26.63% after chemical
analysis.
I. Purpose of test:
Test the feasibility of beneficiation of red mud
by high gradient magnetic separator.
II. Flow Sheet and Test Parameter
1. Flow sheet
2. Test Parameter
1. Test Machine: DLS-50 High Gradient Magnetic
Separator
2. Concentration of Slurry: m% 30%
3. Magnetic Conductive Medium in Matrix: Steel
Rod ø2mm
4. Frequency of Pulsation: 300r/min
5. Rotation Speed: 20s/r
III. Test Result
1. The weight of
oversize sample (20 mesh screen), which is not tested by magnetic separator,
is 0.6% of the total 500 gram.
2. The weight of
undersize sample (20 mesh screen), is 99.4% of the total 500 gram sample. See
the following test result:
IV. Preliminary Conclusion
1. After processed by
high gradient magnetic separator for one time (roughing), the TFe% can be
upgraded to 39.45%, yield rate 34.39%.
2. Process the
concentrates of roughing by high gradient magnetic separator for another
time, the TFe% can be upgraded to 52.03%. The yield rate of final
concentrates is 8.37%.
|
12/06/2012
Subscribe to:
Post Comments (Atom)
0 评论:
Post a Comment